Click image to view full size image
Natural Rubber Mixer for Kneading Rubber Machine with CE
1. With completely condition, materials are mixed or plasticated under certain pressure, controllable temperature, which makes high production efficiency and obtains excellent stale quality
2. Spiral angle and over lapping length of blades of the rotors are of reasonable design and make the materials to be dispersed uniformly
3. Surface where is contacted with the materials are all plated with hard chromium and polished, which is corrosion-resistant and wear-resistant
4. Jacket construction is adopted in parts that surfaces contact with materials to achieve excellent water-cooling or steam heating effect and fit in with the needs of plastics and rubber processing technology.
Rubber Kneader
Technical Parameter Of Rubber Kneader
|
Type |
X (S)N35 |
X(S)N55 |
X(S)N75 |
X(S)N110 |
|
Total Volume of mixing chamber(L) |
75 |
125 |
180 |
250 |
|
Working Volume of mixing chamber(L) |
35 |
55 |
75 |
110 |
|
Driving motor power(KW) |
55 |
75 |
110 |
185 |
|
Tilting motor power(KW) |
5.5 |
5.5 |
5.5 |
7.5 |
|
Tilting angle |
110 |
110 |
110 |
110 |
|
Rotational speed of the rotor(front/rear) |
36/30 |
36/30 |
36/30 |
30/24.5 |
|
Pressure of compressed air(Mpa) |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
|
Cooling wate presssure (Mpa) |
0.3~0.4 |
0.3~0.4 |
0.3~0.4 |
0.2~0.4 |
|
Size:length×Width×Height |
3150×1900×2880 |
3280×2120×3090 |
3250×2210×3250 |
4075×2712×3580 |
Machines pcitures show:
Contact:Stephanie
Wu,MOB//:008618669718510